alterbox.net


Home > I Have > I Have Problems With My Speakers On HP Laptop

I Have Problems With My Speakers On HP Laptop

Perform a simple sound test . If you have a ProBook 440 G3, 470 G3, or 450 G2, go to the No audio after reinstalling the operating system section. Click Next. If sound is heard correctly from each speaker, you are finished. useful reference

Z7_3054ICK0KGTE30AQO5O3KA3016 hp-feedback-input-portlet Actions ${title} Loading... Figure : Audio test results If the Audio Playback Test passed without errors but the audio problems are still present, continue to the next step. If updating the BIOS did not resolve the audio issue, continue to the next step. Figure : Troubleshooting completed Step 2: Checking volume and mute settings The volume setting for one or more sound devices might be disabled or set too low.

Return to Step 2: Perform a simple sound system test to test the sound. Updating the BIOS can resolve compatibility conflicts that may exist between different hardware components on the computer. Watch a video on checking Device Manager in Windows 8 Move the mouse pointer to the lower left corner of the screen, right-click, select Device Manager from the menu.

Perform a simple sound system test . Press Esc and then Enter to exit the BIOS. Complementary Content Sound should be audible through the notebook's speakers.

Play a sound. Figure : Volume Mixer Make sure the volume is not muted by looking at the Mute buttons below the volume slider. For all other computers, start with the next section. Resetting the optical drive is similar to clearing the cache on the computer by restarting it.

Figure : How do you want to search for driver software Windows checks for and installs any updated drivers found. note: For detailed information about the troubleshooting task, click View detailed information. Video of using the Microsoft Sound Troubleshooter in Windows 7 Click Start , and then click Control Panel. If sound is still not audible, replace the speaker cable or perform the test again with different speakers.

To prevent damage to the speakers and to prevent fuses from blowing in the future, keep the following items in mind when using the computer: Turn off the speaker volume control One supports only sound to the headphones, and the other supports sound to the headphones and the use of a microphone. If there is no sound coming from the speaker, not even a humming noise, remove and replace the fuse. The default settings are restored, the BIOS Setup utility closes, and the computer starts into Windows.

For example, if the volume sounds good in Windows, but is too low when playing a DVD movie, open the software that you are using to play the DVD movie and see here When you use non-powered speakers with a line-out connector on the computer, the volume is much lower/softer than usual. Was the information on this page helpful? If your BIOS is up-to-date or if the issue still exists after updating the BIOS, contact an HP support agent for additional assistance.

Download drivers from audio technology providers If you cannot find a driver from HP or Device Manager, download and install an updated audio driver package from the audio technology provider using If the hard reset did not resolve the audio issue, continue to the next step. Click Hardware and Sound. this page To prevent damage to the speakers and to prevent fuses from blowing in the future, keep the following items in mind when using the computer: Turn off the speaker volume control

If you enter a tone number incorrectly, run the test again. Figure : Speaker Setup Front left and right If sound is: audible from each speaker - you are finished. C Sub (black) is for the Center or Subwoofer speaker.

If the computer is upgraded to Windows 7, use HP Support Assistant to scan for updated drivers.

Click Close. Search all support All Support Software, Drivers and Updates Troubleshooting How to Product Information User Guides Cancel Example: “Laserjet P1102w driver” or “HP Pavilion 17-f002na will not turn on” Loading Results Remove the fuse cover and then the fuse, and look through the glass cylinder. If sound is heard correctly from each speaker, you are finished.

Step 7: Troubleshooting a high-definition audio device A high-definition audio device on a notebook computer may no longer work after restarting Windows 7 or resuming from hibernation/sleep. note: For more information about installing and using the HP PC Hardware Diagnostic tests, see Testing for Hardware Failures (Windows 10, 8). Click Close. Get More Info If the button displays a small red circle, the volume is muted.

Then match the speaker cable to the connectors on the computer using the colors shown in the Speakers Property window. The On-board Audio setting in the BIOS should be Enabled. The sound should now be restored. Step 10: Restore or reset your computer If you have tried the troubleshooting steps and your sound is still not working properly, try restoring your computer.

Figure : Testing volume Each time you click the master volume slide bar, you should hear a beep sound through the headphones. Visit now Z7_3054ICK0KGTE30AQO5O3KA30H4 hp-feedback-banner-portlet Actions ${title} Loading... The Driver Recovery process in the HP Recovery Manager restores audio drivers for the sound hardware that came pre-installed on the computer. This removes all of the power from the computer.

note: For detailed information about the troubleshooting, click View detailed information in the troubleshooter window. With some configurations it might be possible to turn on the power and press F10 to access the BIOS without going through the UEFI Startup Menu.